一株产电菌嗜根考克氏菌(Kocuria rhizophila)的分离及其产电性能优化

本研究以天津泰达污水处理厂污泥浓缩间的污泥为接种物,启动并运行了微生物燃料电池(MFCs).从富集的阳极生物膜上分离得到了一株纯培养的微生物菌种,命名为P2-A-5.研究发现,菌株P2-A-5的16S rDNA序列与菌株Kocuria rhizophila DC2201具有100%的同源性,结合该菌的形态特征和生理生化实验,将其归属为嗜根考克氏菌(Kocuria rhizophila).通过化学剂处理、底物种类和浓度的优化,进一步提高其在微生物燃料电池中的产电性能.结果表明,菌株K.rhizophila P2-A-5经0.5 mg·L-1溶菌酶处理45 min后,接种到以2.0 g·L-1海藻糖为底物的阳极液中运行MFCs,其功率密度达到314.8 m W·m-2,比优化前(74.9 m W·m-2)提高了320.3%.这是首次对K.rhizophila种内微生物产电性能及其在微生物燃料电池中应用的报道,其成果对于丰富产电微生物的多样性,挖掘更多具有高电化学活性的微生物菌种,提高其产电性能具有重要的理论意义.     

Aureobasidium pullulans UVMU3-1产耐热性胞外漆酶活性物质培养基优化及其对染料脱色作用

对出芽短梗霉无色素突变株Aureobasidium pullulans UVMU3-1产耐热性胞外漆酶活性物质培养基进行优化,并研究其分子量大小、热稳定性及对三苯甲烷类染料孔雀石绿和结晶紫的脱色作用.结果表明:蔗糖、NaNO_3为UVMU3-1产耐热性胞外漆酶活性物质的最佳碳源和氮源,产酶优化培养基配方为:蔗糖66.5 g·L~(-1),NaNO_338.4 g·L~(-1),NaCl 1.08 g·L~(-1),酵母浸粉0.2 g·L~(-1),KH_2PO_41 g·L~(-1),pH=6.0.影响UVMU3-1产耐热性胞外漆酶活性物质的因素依次为:起始pH蔗糖NaClNaNO_3,培养7 d时产生最大酶活(94.81 U·L~(-1)),比对照提高3.85倍.其分子量小于1000 D,具有良好的热稳定性,煮沸30 min后高温酶活仍残留72.50%.粗酶液(7.5 U·L~(-1))与三苯甲烷类代表性染料孔雀石绿和结晶紫75℃反应5 min后,脱色率分别为76.3%、77.5%,反应35 min后脱色率分别达到96.3%、95.3%.     

磁微球负载硝基锌卟啉光催化剂的制备及催化性能研究

以氯化血红素为原料,制备了磁负载的硝基锌卟啉光催化剂.同时,利用热重分析仪(TG)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)和振动磁强计(VSM)对催化剂进行了表征,发现制备的催化剂负载率为32.06%,催化剂为粒径均一的球形壳-核结构,具有良好的磁性.其次,研究了催化剂的催化降解性能.结果表明,磁负载硝基锌卟啉光催化剂在可见光下,对水中的双酚A(BPA)、对硝基苯酚(PNP)等均有90%以上的去除率;对于活性红染料废水的降解也取得了83.67%的降解率.自由基捕获实验证明,电子(e-)、羟基自由基(·OH)、空穴(h+)和氧自由基(O-·2)是降解反应中重要的活性物种.最后通过GC-MS等手段对降解机理进行了研究.     

Cu(II), Fe(III) and Mn(II) combinations as environmental stress factors have distinguishing effects on Enterococcus hirae

Pollution by various heavy metals as environmental stress factors might affect bacteria. It was established that iron (Fe(III)), manganese (Mn(II)) and copper (Cu(II)) ion combinations caused effects on Enterococcus hirae that differed from the sum of the effects when the metals were added separately. It was shown that the Cu²⁺-Fe³⁺ combination decreased the growth and ATPase activity of membrane vesicles of wild-type E. hirae ATCC9790 and atpD mutant (with defective F_oF₁-ATPase) MS116. Addition of Mn²⁺-Fe³⁺ combinations within the same concentration range had no effects on growth compared to control (without heavy metals). ATPase activity was increased in the presence of Mn²⁺-Fe³⁺, while together with 0.2 mmol/L N,N'-dicyclohexylcarbodiimide (DCCD), ATPase activity was decreased compared to control (when only 0.2 mmol/L DCCD was present). These results indicate that heavy metals ion combinations probably affect the FOF1-ATPase, leading to conformational changes. Moreover the action may be direct or be mediated by environment redox potential. The effects observed when Fe³⁺ was added separately disappeared in both cases, which might be a result of competing processes between Fe³⁺ and other heavy metals. These findings are novel and improve the understanding of heavy metals ions effects on bacteria, and could be applied for regulation of stress response patterns in the environment.     

3种增塑剂单独和联合暴露对MCF-7细胞增殖的影响

为了探究结构差异较大、应用较为广泛的几类增塑剂雌激素活性的联合效应,选择邻苯二甲酸二丁酯(DBP)、双酚A(BPA)和壬基酚(NP)作为邻苯二甲酸酯、双酚A类和烷基酚类增塑剂的代表物进行试验.用DBP、BPA和NP单独及两两混合处理MCF-7细胞.采用MTT法检测培养24h、48 h、72 h和96h时的细胞增殖情况.采用流式细胞术检测药物培养48h后的细胞生长周期分布,并计算细胞增殖指数(PI).运用效应叠加模型(ES)判定联合效应类型.结果表明,在单独暴露试验中,DBP、BPA和NP组PI均大于1,且均能提高S期(DNA合成期)细胞比例.因此,DBP、BPA和NP均能显著促进MCF-7细胞增殖.混合暴露试验中,1)DBP和BPA在MTT试验中24h、48h、72 h和96h时的效应叠加指数(ESI)分别为1.013 9、1.023 8、0.9999、1.010 8,在流式细胞仪试验中ESI为1.014 1.因此,DBP和BPA的雌激素活性联合效应为加和作用.2)DBP和NP在MTT试验中24 h、48 h、72 h和96 h时的ESI分别为1.004 0、1.008 6、1.011 5、1.010 3,流式细胞仪试验中ESI为0.997 0.因此,DBP和NP的雌激素活性联合效应为加和作用.3)BAP和NP在MTT试验中24h、48 h、72 h和96h时的ESI分别为0.980 6、0.981 8、0.977 7、0.973 3,流式细胞仪试验的ESI为0.912 8.由此可知,BPA和NP的雌激素活性联合效应为拮抗作用.因此,可以采用MCF-7细胞增殖试验研究环境污染物雌激素活性联合效应.     

Cu(II), Fe(III) and Mn(II) combinations as environmental stress factors have distinguishing effects on Enterococcus hirae

Pollution by various heavy metals as environmental stress factors might affect bacteria. It was established that iron (Fe(III)), manganese (Mn(II)) and copper (Cu(II)) ion combinations caused effects on Enterococcus hirae that differed from the sum of the effects when the metals were added separately. It was shown that the Cu^2 +–Fe^3 + combination decreased the growth and ATPase activity of membrane vesicles of wild-type E. hirae ATCC9790 and atpD mutant (with defective F_oF₁-ATPase) MS116. Addition of Mn^2 +–Fe^3 + combinations within the same concentration range had no effects on growth compared to control (without heavy metals). ATPase activity was increased in the presence of Mn^2 +–Fe^3 +, while together with 0.2 mmol/L N,N′-dicyclohexylcarbodiimide (DCCD), ATPase activity was decreased compared to control (when only 0.2 mmol/L DCCD was present). These results indicate that heavy metals ion combinations probably affect the F_OF₁-ATPase, leading to conformational changes. Moreover the action may be direct or be mediated by environment redox potential. The effects observed when Fe^3 + was added separately disappeared in both cases, which might be a result of competing processes between Fe^3 + and other heavy metals. These findings are novel and improve the understanding of heavy metals ions effects on bacteria, and could be applied for regulation of stress response patterns in the environment.     

Surface modification of polypropylene non-woven fibers with TiO2 nanoparticles via layer-by-layer self assembly method: Preparation and photocatalytic activity

Polypropylene (PP) meltblown fibers were coated with titanium dioxide (TiO₂) nanoparticles using layer-by-layer (LbL) deposition technique. The fibers were first modified with 3 layers of poly(4-styrenesulfonic acid) (PSS) and poly(diallyl-dimethylammonium chloride) (PDADMAC) to improve the anchoring of the TiO₂ nanoparticle clusters. PDADMAC, which is positively charged, was then used as counter polyelectrolyte in tandem with anionic TiO₂ nanoparticles to construct TiO₂/PDADMAC bilayer in the LbL fashion. The number of deposited TiO₂/PDADMAC layers was varied from 1 to 7 bilayer, and could be used to adjust TiO₂ loading. The LbL technique showed higher TiO₂ loading efficiency than the impregnation approach. The modified fibers were tested for their photocatalytic activity against a model dye, Methylene Blue (MB). Results showed that the TiO₂ modified fibers exhibited excellent photocatalytic activity efficiency similar to that of TiO₂ powder dispersed in solution. The deposition of TiO₂ 3 bilayer on the PP substrate was sufficient to produce nanocomposite fibers that could bleach the MB solution in less than 4 hr. TiO₂-LbL constructions also preserved TiO₂ adhesion on substrate surface after 1 cycle of photocatalytic test. Successive photocatalytic test showed decline in MB reduction rate with loss of TiO₂ particles from the substrate outer surface. However, even in the third cycle, the TiO₂ modified fibers are still moderately effective as it could remove more than 95% of MB after 8 hr of treatment.     

Biological removal of antiandrogenic activity in gray wastewater and coking wastewater by membrane reactor process

A recombinant human androgen receptor yeast assay was applied to investigate the occurrence of antiandrogens as well as the mechanism for their removal during gray wastewater and coking wastewater treatment. The membrane reactor (MBR) system for gray wastewater treatment could remove 88.0% of antiandrogenic activity exerted by weakly polar extracts and 97.3% of that by moderately strong polar extracts, but only 32.5% of that contributed by strong polar extracts. Biodegradation by microorganisms in the MBR contributed to 95.9% of the total removal. After the treatment, the concentration of antiandrogenic activity in the effluent was still 1.05 μg flutamide equivalence (FEQ)/L, 36.2% of which was due to strong polar extracts. In the anaerobic reactor, anoxic reactor, and membrane reactor system for coking wastewater treatment, the antiandrogenic activity of raw coking wastewater was 78.6 mg FEQ/L, and the effluent of the treatment system had only 0.34 mg FEQ/L. The antiandrogenic activity mainly existed in the medium strong polar and strong polar extracts. Biodegradation by microorganisms contributed to at least 89.2% of the total antiandrogenic activity removal in the system. Biodegradation was the main removal mechanism of antiandrogenic activity in both the wastewater treatment systems.     

Cu(Ⅱ), Fe(Ⅲ) and Mn(Ⅱ) combinations as environmental stress factors have distinguishing effects on Enterococcus hirae

Pollution by various heavy metals as environmental stress factors might affect bacteria. It was established that iron(Fe(Ⅲ)), manganese(Mn(Ⅱ)) and copper(Cu(Ⅱ)) ion combinations caused effects on Enterococcus hirae that differed from the sum of the effects when the metals were added separately. It was shown that the Cu2+–Fe3+combination decreased the growth and ATPase activity of membrane vesicles of wild-type E. hirae ATCC9790 and atp D mutant(with defective FoF1-ATPase) MS116. Addition of Mn2+–Fe3+combinations within the same concentration range had no effects on growth compared to control(without heavy metals). ATPase activity was increased in the presence of Mn2+–Fe3+, while together with0.2 mmol/L N,N′-dicyclohexylcarbodiimide(DCCD), ATPase activity was decreased compared to control(when only 0.2 mmol/L DCCD was present). These results indicate that heavy metals ion combinations probably affect the FOF1-ATPase, leading to conformational changes. Moreover the action may be direct or be mediated by environment redox potential.The effects observed when Fe3+was added separately disappeared in both cases, which might be a result of competing processes between Fe3+and other heavy metals. These findings are novel and improve the understanding of heavy metals ions effects on bacteria,and could be applied for regulation of stress response patterns in the environment.     

微生物絮凝剂M-C11处理高岭土悬浊液的响应曲面优化

采用响应曲面法对微生物絮凝剂M-C11处理高岭土悬浊液的过程参数进行优化,选取中心复合实验设计(CCD),以p H、M-C11投加量和Ca Cl2投加量等因素为自变量,以处理后的高岭土悬浊液絮凝率(Fr)为响应值,并借助扫描电镜对絮凝剂的作用机理进行初步探讨。结果表明,微生物絮凝剂M-C11可显著改善高岭土悬浊液的絮凝性能,且选取的3种单因素水平均可影响絮凝剂活性。经多元回归拟合分析,在M-C11投加量为2.56 m L,Ca Cl2投加量为0.37 g/L的最优条件下,微生物絮凝活性实验值可达92.37%,接近模型预测值(92.30%)。Ca Cl2投加量对絮凝效果的影响高于M-C11投加量(PCa Cl2相似文献